The Cavallo Hoof Boot Stud Application Tool (New & Improved)
The Cavallo Hoof Stud Application Tool is used to install Cavallo Hoof Boot Studs. This tool fits right at the end of your drill to make installing Cavallo Hoof Boot Winter ice studs quick and easy. Price is for one reusable tool.
Things to keep in mind about Cavallo Hoof Boot Studs:
- Make sure your boots fit well, and your horse is acclimated to wearing them before you apply studs
- Always apply studs to both boots for proper balance
- Do not turn horses out wearing studded boots. A frolicking horse can injure itself and others with studded boots.
- When drilling, make sure the stud does not extend past the sole of the boot. This can especially be a problem with older boots that have worn soles.
- Use caution when installing studs in used boots, as the sole tread is thinner than when new. Studs may penetrate through older, well-worn soles.
- Always use your best judgment when going out for a ride in slippery conditions. Hoof boots provide extra traction, but they do have their limits.

Evelyn Santer using Trek Boots and Studs in the Italian Alps
Installation is easy!
Pre-drill 1/8 inch locator holes with a 3/16 inch drill bit. Lock stud into position on the end of the NEW AND IMPROVED Application Tool. Position the end of the stud tread over the drilled hole and slowly drill the stud into the sole tread until the base of the stud head touches the sole. Install 6 studs in each hoof boot sole. Please note: For LEB (Long Ear Donkey Boots), we recommend 4 studs per boot for optimal traction and performance.
IT’S THAT SIMPLE! Watch Greg’s demonstration below:
Inherent with ice, snow and mud are a variety of slippery conditions. When riding, please use cautionary judgment for your safety, your horse’s, and others around you. You should know how your horse will react to being ridden in these types of conditions. Always be cautious when making the decision to go for a snowy ride to ensure everyone gets through the winter safely without injury and can look forward to enjoying the warm sunny rides in the months ahead.
Be sure your boots fit well before trying them with studs. Legs, hoofs, pasterns and coronets can be destroyed by the use of studs. Be diligent. Be careful. Do not use studs on one boot and not the other. Horses need balance. Do not turn horses out with studded boots on. Playing around can tear up their legs. And keep yourself out of the way, too. Getting stepped on by a studded hoof is not pleasant. If you are drilling into older boots, please ensure that the stud tread does not extend past the sole of the boot. Boots that are worn down may have a thinner sole, and the placement of studs becomes very important. Please use your own thoughtfulness and best judgment. Always be aware that you have studs in the boots and do not ride in them when they aren’t needed.









